GrantedIndustrialDecided 22 April 2021

Collinstown Leixlip, Blakestown Kellystown, Collinstown Industrial Park

Industrial expansion including a modular storage unit, waste tanks, and a two-storey extension to a process support building.

21229 · Kildare County Council · Lodged 26 February 2021

Reference: 21229
Authority: Kildare County Council
Register status: Decided
Type: PERMISSION
Received: 26 February 2021

Summary

AI-generated

The development at Collinstown Industrial Park includes a single-storey modular storage unit and three new bunded waste storage tanks. It also proposes a two-storey extension to the existing Process Support Building and three additional waste tanks with access platforms.

Industrialindustrialextensionstorage

Storeys: 2

Generated from the description above by an AI model and may contain mistakes. The council’s description is the authoritative record.

Official record

Development description

(1) modular storage unit. A single storey storage unit, sized approximately 7 metres by 12 metres and 6 metre high, located in the utilities yard to the north of the existing fab10 support building. (2) fab10 waste tanks. The installation of 3no. New bunded waste storage tanks, 2no. Sized approximately 2.5 metres in diameter and 16.5 metres high, located in the utilities yard to north of the existing fab10 support building and 1no. Sized approximately 3.7metres in diameter and 15 metres high located to the north of the fab10 utilities yard. (3) process support building extension. The construction of a two-storey extension to the existing process support building (psb) sized approximately 20 metres by 11 metres and 14 metres high, located to the north east of the existing fab 24 process support building. (4) fab24 and fab14 waste tanks. The installation of 3no. Additional waste tanks and associated access platforms and stairways, 1no. Sized approximately 9 metres by 10 metres and 7 metres high, located in the utilities yard to the north of the existing fab24 manufacturing building and 1no. Sized approximately 3 metres high located to the south of existing fab14 process building and 1 no. Sized approximately 4.25 metres in diameter and 16 metres high, located to the south of existing fab14 process building. (5) site works. The proposed development includes linking pipe-bridges to the fab10 and fab14 support buildings, site development works, site utilities, site lighting, separation walls, road alterations, landscaping and all associated site works. This application consists of a variation to a previously permitted development for an activity for which a licence under part iv of the environmental protection agency act 1992 (as amended by the protection of the environment act, 2003) is required. A natura impact statement ("nis") accompanies this application for inspection or purchase at the office of the planning authority. This is a site to which the chemical act (control of major accident hazards involving dangerous substances) regulations 2015 (s. I. 209 of 2015) applies

Land-use zoning

What this land is zoned for

Industry and WarehousingBP

“To provide for industry, manufacturing, distribution and warehousing.”

National zoning type: Mixed/general commercial/industrial/enterprise uses

Objective set by the Leixlip LAP 2020-2023 (2020–2026). The planning authority decides each application on its own merits — this is the zoning context, not a compliance assessment.

Read the zoning objectives in the development plan

Key dates

Timeline

Application received26 February 2021
Decision due22 April 2021
Decision issued22 April 2021
Grant issued15 June 2021
Permission expiry14 June 2026

In the area

Applications near this site

Other planning applications within about 500 m — what else is being proposed or built nearby.

Related developments

Similar applications

Ranked by what these developments actually propose, not by matching words — so you can see how comparable applications were decided.

Community

Discussion

What local people think about this application.

Nobody watching yet

Community sentiment

No votes yet

Nobody has voted on this application yet.

Community sentiment — a straw poll of people who visited this page, not a statutory submission. To make a valid observation you must submit it to the planning authority.

No comments yet. Be the first to say what you think about this application.

Comments are moderated and are the opinions of the people who wrote them. They form no part of the statutory planning process — to make a valid observation you must submit it to the planning authority.